If you've been asking how many solar panels you need in the Philippines, the answer is already sitting in your Meralco or VECO bill β most homeowners just haven't looked at the right line. Your monthly kWh consumption drives everything. Not the peso total. Not the brand of panel. The kilowatt-hours. That single number turns into a system size, and a system size turns into a panel count in five steps.
Magkano ang Kuryente Mo? Start With Your Monthly Bill
Your Meralco or VECO statement has everything you need β but most homeowners stare at the total amount and completely miss the line that matters: kWh consumed. It's printed in the breakdown section, right beside your generation charge. That's your real starting point. Not the peso figure. The kilowatt-hours.

Can't find it? Use this conversion table. It's built on typical 2026 Meralco residential rates and will get you close enough to start sizing.
| Monthly Bill (PHP) | Approximate kWh/Month |
|---|---|
| PHP 2,000 | 150β180 kWh |
| PHP 5,000 | 400β450 kWh |
| PHP 8,000 | 650β750 kWh |
| PHP 10,000+ | 850β950 kWh |
Kung PHP 5,000 ang singil sa ilaw mo every month, you're burning roughly 400β450 kWh. That's the number we work from. The formula below turns it into a panel count in under a minute.
Paano Kalkulahin: From kWh to Number of Panels
Five steps. That's it. Solar companies love to make this feel complex β it isn't.
- 1 Get your monthly kWh from your bill β or use the table above.
- 2 Divide by 30 to get daily kWh consumption.
- 3 Divide by 4.5β5 β peak sun hours per day across most of Luzon and Visayas. Reliable for the vast majority of Philippine homes.
- 4 The result is your system size in kW.
- 5 Divide by 0.4 β the rated output of one standard 400W panel β to get your final panel count.
Real example: PHP 5,000/month β 425 kWh Γ· 30 = ~14 kWh/day Γ· 4.5 = ~3.1 kW Γ· 0.4 = about 8 panels. Done.

| Monthly Bill (PHP) | Recommended System Size | Estimated Panels (400W) |
|---|---|---|
| PHP 2,000 | 1β2 kW | 3β5 panels |
| PHP 5,000 | 3β4 kW | 8β10 panels |
| PHP 8,000 | 5β6 kW | 13β15 panels |
| PHP 12,000+ | 8β10 kW | 20β25 panels |
Most Philippine homes with PHP 5,000β8,000/month bills are well-served by a 3β6 kW system β that's roughly 8β15 panels. Right-sized, right-priced.
Sulit Ba? What Affects Your Final Panel Count
The formula gives you a starting point. Three variables decide where you actually land.
1. Roof orientation. South-facing roofs capture the most solar exposure in the Philippines. East- or west-facing slopes still produce β but expect a 15β20% efficiency drop, which typically means one or two additional panels to match the same output. A flat concrete roof is actually ideal: panels can be tilted to the optimal angle without compromise.
2. Your aircon load. Aircon is the single biggest driver of kuryente bills in Filipino homes. One 1.5HP inverter unit running 8 hours a day adds roughly 4β6 kWh to your daily consumption β that's a 1.1 kW rated unit drawing 0.5β0.8 kW average in Philippine heat. Two units running full days can push your required system size up by 3β5 kW on their own. Size for the aircon first, everything else second.
3. On-grid vs. hybrid with battery backup. If you want protection during a brownout β especially in areas with unreliable grid supply β a hybrid system with battery storage typically needs 20β30% more panels to cover both your load and battery charging. It costs more upfront. The peace of mind is real.
Under Philippine net metering rules (regulated by the ERC), on-grid solar owners can export surplus power back to Meralco or their local distribution utility β credited directly against their next bill. It's why some homeowners deliberately oversize by 10β15%. The math works in their favor.

Get a Free System Size Estimate
Panel count shifts by brand, roof type, and location β Mindanao's sun hours differ from Metro Manila's, sometimes meaningfully. The most accurate figure comes from sharing your actual monthly bill with an installer who knows Philippine conditions cold. Consider a homeowner in Cavite with a PHP 6,800/month bill: a proper site assessment came back at 4.5 kW, not the 6 kW a generic online calculator suggested. Getting the sizing right saved over PHP 60,000 in unnecessary equipment.
LakaSolar installs across the Philippines β Luzon, Visayas, Mindanao β with certified technicians and no hard sell. An honest assessment, based on your actual bill.
Frequently Asked Questions
How many solar panels do I need for a PHP 5,000 Meralco bill?
A PHP 5,000/month bill typically means 400β450 kWh consumed, which calls for a 3β4 kW system β roughly 8β10 standard 400W panels. That covers most of your daytime consumption and should bring your singil sa ilaw down from the first full billing cycle.
Can I run my aircon on solar in the Philippines?
Yes β but size for it deliberately. A 1.5HP inverter unit running 8 hours a day adds 4β6 kWh to your daily load, so most homes with aircon need at least a 5β6 kW system to actually move the needle on their bill.
What if I don't know my kWh β only my bill amount?
Check your Meralco or VECO statement for "kWh consumed" in the breakdown section; if it's buried, divide your generation charge by approximately PHP 7β8 to estimate kWh, or send LakaSolar your bill β sizing assessment is free.
Your bill already holds everything you need. Most homeowners just haven't read it the right way yet. Now you have the formula. Use it.
Quick Savings Estimate
Get a Free Quote
Custom system design




